Anchor ads are not supported on this page.

There are at least 200 of these industrial guns out in the field in the U.S. and around 100 overseas. Remington services all of them in Lonoke, Ark. Remington also fabricates around 25 new MasterBlasters a year. Most industrial customers have their industrial gun for many years before it needs to be rebuilt or replaced.<\/p>\n\n\n\n

I was honored to have the opportunity to shoot one of these incredibly badass tools. It is a perfect example of the \"see a need, fill a need\" mentality that Remington uses in every one of its firearms and rounds of ammunition it puts its name on.<\/p>\n\n\n\n

If you are an industrial customer that needs more information on an industrial gun, you can contact Remington's Industrial 8-gauge department at 501-676-4150.<\/p>\n","post_title":"Gun Test: Hands On the Remington MasterBlaster 8-Gauge Industrial Gun","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"open","post_password":"","post_name":"remington-masterblaster-industrial-gun","to_ping":"","pinged":"","post_modified":"2024-12-02 14:42:57","post_modified_gmt":"2024-12-02 19:42:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/04\/remington-masterblaster-industrial-gun\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":129786,"post_author":"882","post_date":"2018-12-03 07:03:38","post_date_gmt":"2018-12-03 12:03:38","post_content":"

Built-In Features<\/h3>\r\nI hadn\u2019t heard of Cedar Enterprises before, but the company\u2019s two-stage trigger is superb. Described as breaking between 4.2 and 4.6 pounds, it feels like rolling a ball bearing against a strand of glass no thicker than a spaghetti noodle. And yet, cosmetically, the trigger doesn\u2019t look any different on the exterior than another mil-spec trigger unit.\r\n\r\nCompleting the user interface is the beard-friendly ACE ARFX stock and the very comfortable Ergo Tactical Deluxe grip. The ACE ARFX is a clean design with a simple foam sleeve over the buffer tube. This foam is soft to the cheek and also makes for a comfortable interface regardless of temperature. The Ergo pistol grip is contoured with a palm swell and comes with a removable shelf. The shelf supports your hand and inspires a more relaxed grip for firing\u2014something that promotes fine motor control, a necessity for taking advantage of the Midnight Dragon\u2019s trigger.\r\n\r\nThe elements combine with the forged aircraft-grade 7075-T6 aluminum receivers for a substantial weight of 9.55 pounds, which makes for a very enjoyable shooting experience. Despite the lack of a muzzle device, perceived recoil is practically non-existent. What isn\u2019t absorbed by the rifle\u2019s weight is transferred gently to the shooter through the rubberized grip and buttplate. Any shift or movement of the gun under your cheek is masked by the soft foam-covered buffer tube. In short, DoubleStar has removed just about any excuse for poor shooting results. This puts a surprising amount of pressure on the shooter. If you miss, you\u2019ll be hard pressed to find an excuse outside of shooter error.\r\n

Previous Testing<\/h3>\r\nIt may spoil the review, but I must mention what drove my excitement about this rifle. A few months ago, I hit the range with a shooting partner to test some different loads through this gun. Although some will argue that specific twist rates can only do well with specific bullet weights, I haven\u2019t found that to matter as much at 100 yards as long as the ammo itself is consistent.\r\n\r\nI agree that matching the projectile weight to the twist rate can make or break a rifle\u2019s accuracy, but the difference at 100 yards is minimal if the projectile is concentric and the powder charge is consistent. My experience has been that ammunition quality is more important than matching the projectile weight with the twist rate.\r\n\r\nOn this particular day, we were making our way through a variety of different loads with 62-grain projectiles. Our intent was to find the differences between projectiles of different brands. Sometimes a rifle just likes a specific loading from one specific manufacturer. I learned this in my early rifle days when my Marlin had a particular favorite, even among match ammunition.\r\n

Running Hot<\/h3>\r\nIt was a hot day, and the barrel was warm after our fifth 10-shot group. We only paused between groups to reload. Using a Caldwell Stinger rest, and the rifle was equipped with Nikon\u2019s 4-16x50mm Black X1000 scope in a Warne XSKEL mount. We loaded 10 Nosler 62-grain Varmageddon FBHP rounds. I fired five shots, my partner fired five, and we achieved an incredible result: a ragged hole about half an inch wide.\r\n\r\nIt\u2019s safe to say that the DoubleStar Midnight Dragon and Nosler\u2019s 62-grain Varmageddon ammo made for a good pairing. A more frustrating note is that I now find myself chasing that group every time I go out to the range, and the Midnight Dragon has set the standard for what I expect from any rifle supposedly built for accuracy. It\u2019s one thing to know a group is possible; it\u2019s another to have shot it and want to shoot it again. On a good range day, I can achieve these results again with the Midnight Dragon and Nosler ammo, and I\u2019ve often been disappointed when other \u201caccurized\u201d rifles haven\u2019t gotten nearly as close. For that reason, I\u2019m just as excited to head to the range with the Midnight Dragon now as when it was first announced in 2013.\r\n

DoubleStar Midnight Dragon Results<\/h3>\r\nI wanted to see how the rifle would run with a wider variety of loads and manufacturers. For this review, I tested each load by firing a single five-shot group at 100 yards, and once again, I used a Caldwell Stinger rest. I also used the same Nikon scope but installed it in a Nikon mount this time around. The Black FX1000 is a first-focal-plane scope that I have come to enjoy for groupings because it makes the job easy. You can quickly make adjustments regardless of the magnification level.\r\n\r\nMy intent with this test was to show how the Midnight Dragon might perform in the real world with commonly available higher-end ammunition. Again, the barrel was generally warm, and I only paused between groups to reload. My shooting cadence was about one round every other second.\r\n\r\nThe worst of my five-shot groups came with Hornady\u2019s range-grade 62-grain Black FMJs, but it was still only 1.5 inches. My best group measured just 0.3 inches with Hornady\u2019s 68-grain Match BTHPs until human error produced a flyer. But 0.3 inches is impressive for four shots. Especially when you consider that, though I spent 15 years on active duty in the Army, I think of myself as more of a handgunner than a rifleman. In other words, I\u2019m no PRS shooter. The Midnight Dragon is just that good. Give the rifle with a steady platform and it will hit what you point it at with ego-killing precision.\r\n\r\nIf used as a varmint gun, for example, or to engage any target that can be stopped with the .223 Remington or 5.56mm NATO, 0.3 to 1.5 MOA is plenty acceptable, especially if that 1.5 MOA can be achieved with common range ammo. Even the military-surplus 77-grain IMI rounds produced a group less than 1 MOA.\r\n

DoubleStar Midnight Dragon: Worth The Weight<\/h3>\r\nAre there any drawbacks with the Midnight Dragon? For me at least, it has been slightly difficult to transport. At just over 42 inches in total length, the Midnight Dragon needs a spacious den. It\u2019s also hefty\u2014perfect for bench shooting, but not ideal for a long hike. These drawbacks are rather insignificant, however, when you\u2019re after a distant target or varmint. Transportability could easily be enhanced with a folding stock mechanism like those offered by Law Tactical.\r\n\r\nI\u2019ve also never experienced a single malfunction with the Midnight Dragon, even with loose rounds from the bottom of an old range bag. It\u2019s clear DoubleStar already knew how to make a reliable rifle. The inclusion and proper installation of a custom Shaw barrel into a host engineered exactly for a shooter to take advantage of such a barrel has made for one heck of a rifle. The attention to detail that went into something as simple as properly staking the gas key has obviously gone into the construction of the rest of the rifle. The folks at DoubleStar aren\u2019t just assembling rifles\u2014they\u2019re manufacturing, smithing and perfecting them<\/a>.\r\n\r\nIf the Midnight Dragon has inspired you to simply order a Shaw barrel matching this profile, I have some bad news. As of this writing, Shaw does not publicly list a bull barrel like this one on its own, even using the company\u2019s custom ordering system. The closest I could find was over $400. That\u2019s more than one third the MSRP of the Midnight Dragon. But even if you built your own Midnight Dragon clone, it wouldn\u2019t come with DoubleStar\u2019s lifetime warranty. So maybe get it straight from the source.\r\n\r\nFor more information, visit star15.com<\/a>.\r\n

DoubleStar Midnight Dragon Specifications<\/h3>\r\n

\r\n \t
• Caliber: 5.56mm NATO<\/li>\r\n \t
• Barrel: 24 inches<\/li>\r\n \t
• OA Length: 42.25 inches<\/li>\r\n \t
• Weight: 9.55 pounds (empty)<\/li>\r\n \t
• Stock: ACE ARFX<\/li>\r\n \t
• Sights: None<\/li>\r\n \t
• Action: Direct impingement semi-auto<\/li>\r\n \t
• Finish: Matte black<\/li>\r\n \t
• Capacity: 5+1<\/li>\r\n \t
• MSRP: $1,116<\/li>\r\n<\/ul>\r\n

  DoubleStar Midnight Dragon Accuracy Results<\/h3>\r\nLoad: Accuracy<\/strong>\r\n

  \r\n \t
  • Hornady 62 Black FMJ: 1.50<\/li>\r\n \t
  • Hornady 68 Match BTHP: 0.30<\/li>\r\n \t
  • IMI Systems 77 OTM: 0.90<\/li>\r\n \t
  • Nosler 35 Varmint: 1.40<\/li>\r\n \t
  • Nosler 60 Ballistic Tip: 0.75<\/li>\r\n<\/ul>\r\nBullet weight measured in grains and accuracy in inches for best five-shot groups at 100 yards.\r\n\r\nThis article is from the 2019 issue of Black Guns magazine. Grab your copy at OutdoorGroupStore.com<\/a>.\r\n\r\n ","post_title":"TESTED: DoubleStar Midnight Dragon Brings Custom Features to AR-15","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"doublestar-midnight-dragon","to_ping":"","pinged":"","post_modified":"2023-05-31 16:19:38","post_modified_gmt":"2023-05-31 16:19:38","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/03\/doublestar-midnight-dragon\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":39},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
    Page 39 of 109 Previous 1 … 38 39 40 … 109 Next

    POPULAR

    No Content Available

    BROWSE BY BRAND

    

    

    

    

    

    

    

    
    \n

    The answer is simple, you can\u2019t, not unless you have a real need like owning a giant kiln. Industrial customers have the option to purchase or lease the MasterBlaster direct from Remington, but a normal consumer can not get their hands on one. Sorry.<\/p>\n\n\n\n

    There are at least 200 of these industrial guns out in the field in the U.S. and around 100 overseas. Remington services all of them in Lonoke, Ark. Remington also fabricates around 25 new MasterBlasters a year. Most industrial customers have their industrial gun for many years before it needs to be rebuilt or replaced.<\/p>\n\n\n\n

    I was honored to have the opportunity to shoot one of these incredibly badass tools. It is a perfect example of the \"see a need, fill a need\" mentality that Remington uses in every one of its firearms and rounds of ammunition it puts its name on.<\/p>\n\n\n\n

    If you are an industrial customer that needs more information on an industrial gun, you can contact Remington's Industrial 8-gauge department at 501-676-4150.<\/p>\n","post_title":"Gun Test: Hands On the Remington MasterBlaster 8-Gauge Industrial Gun","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"open","post_password":"","post_name":"remington-masterblaster-industrial-gun","to_ping":"","pinged":"","post_modified":"2024-12-02 14:42:57","post_modified_gmt":"2024-12-02 19:42:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/04\/remington-masterblaster-industrial-gun\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":129786,"post_author":"882","post_date":"2018-12-03 07:03:38","post_date_gmt":"2018-12-03 12:03:38","post_content":"

    
    
    \r\n\r\nThe DoubleStar Midnight Dragon started with the barrel. Just as the legendary A-10 Warthog, which has saved my life, is said to have been built around the GAU-8 Gatling gun, the Midnight Dragon was built around the barrel. That statement makes sense for every AR. If mil-spec upper and lower receivers are used, with a mil-spec bolt carrier group, what else can make a real difference in terms of accuracy? It\u2019s always about the barrel.\r\n\r\n[in_content post=\"200212\" alignment=\"align-left\" \/]\r\n\r\nDoubleStar was looking to take the 5.56mm NATO to its accuracy limits in the AR platform while keeping the rifle within financial reach of the average dedicated shooter. DoubleStar starts with a custom, spiral-fluted, 24-inch Shaw barrel made from 416 stainless steel with a 1-in-8-inch twist rate and completes the build with a blend of carefully selected parts. Like the barrel, the most important parts were purposefully chosen to create the best shooter experience.\r\n

    Built-In Features<\/h3>\r\nI hadn\u2019t heard of Cedar Enterprises before, but the company\u2019s two-stage trigger is superb. Described as breaking between 4.2 and 4.6 pounds, it feels like rolling a ball bearing against a strand of glass no thicker than a spaghetti noodle. And yet, cosmetically, the trigger doesn\u2019t look any different on the exterior than another mil-spec trigger unit.\r\n\r\nCompleting the user interface is the beard-friendly ACE ARFX stock and the very comfortable Ergo Tactical Deluxe grip. The ACE ARFX is a clean design with a simple foam sleeve over the buffer tube. This foam is soft to the cheek and also makes for a comfortable interface regardless of temperature. The Ergo pistol grip is contoured with a palm swell and comes with a removable shelf. The shelf supports your hand and inspires a more relaxed grip for firing\u2014something that promotes fine motor control, a necessity for taking advantage of the Midnight Dragon\u2019s trigger.\r\n\r\nThe elements combine with the forged aircraft-grade 7075-T6 aluminum receivers for a substantial weight of 9.55 pounds, which makes for a very enjoyable shooting experience. Despite the lack of a muzzle device, perceived recoil is practically non-existent. What isn\u2019t absorbed by the rifle\u2019s weight is transferred gently to the shooter through the rubberized grip and buttplate. Any shift or movement of the gun under your cheek is masked by the soft foam-covered buffer tube. In short, DoubleStar has removed just about any excuse for poor shooting results. This puts a surprising amount of pressure on the shooter. If you miss, you\u2019ll be hard pressed to find an excuse outside of shooter error.\r\n

    Previous Testing<\/h3>\r\nIt may spoil the review, but I must mention what drove my excitement about this rifle. A few months ago, I hit the range with a shooting partner to test some different loads through this gun. Although some will argue that specific twist rates can only do well with specific bullet weights, I haven\u2019t found that to matter as much at 100 yards as long as the ammo itself is consistent.\r\n\r\nI agree that matching the projectile weight to the twist rate can make or break a rifle\u2019s accuracy, but the difference at 100 yards is minimal if the projectile is concentric and the powder charge is consistent. My experience has been that ammunition quality is more important than matching the projectile weight with the twist rate.\r\n\r\nOn this particular day, we were making our way through a variety of different loads with 62-grain projectiles. Our intent was to find the differences between projectiles of different brands. Sometimes a rifle just likes a specific loading from one specific manufacturer. I learned this in my early rifle days when my Marlin had a particular favorite, even among match ammunition.\r\n

    Running Hot<\/h3>\r\nIt was a hot day, and the barrel was warm after our fifth 10-shot group. We only paused between groups to reload. Using a Caldwell Stinger rest, and the rifle was equipped with Nikon\u2019s 4-16x50mm Black X1000 scope in a Warne XSKEL mount. We loaded 10 Nosler 62-grain Varmageddon FBHP rounds. I fired five shots, my partner fired five, and we achieved an incredible result: a ragged hole about half an inch wide.\r\n\r\nIt\u2019s safe to say that the DoubleStar Midnight Dragon and Nosler\u2019s 62-grain Varmageddon ammo made for a good pairing. A more frustrating note is that I now find myself chasing that group every time I go out to the range, and the Midnight Dragon has set the standard for what I expect from any rifle supposedly built for accuracy. It\u2019s one thing to know a group is possible; it\u2019s another to have shot it and want to shoot it again. On a good range day, I can achieve these results again with the Midnight Dragon and Nosler ammo, and I\u2019ve often been disappointed when other \u201caccurized\u201d rifles haven\u2019t gotten nearly as close. For that reason, I\u2019m just as excited to head to the range with the Midnight Dragon now as when it was first announced in 2013.\r\n

    DoubleStar Midnight Dragon Results<\/h3>\r\nI wanted to see how the rifle would run with a wider variety of loads and manufacturers. For this review, I tested each load by firing a single five-shot group at 100 yards, and once again, I used a Caldwell Stinger rest. I also used the same Nikon scope but installed it in a Nikon mount this time around. The Black FX1000 is a first-focal-plane scope that I have come to enjoy for groupings because it makes the job easy. You can quickly make adjustments regardless of the magnification level.\r\n\r\nMy intent with this test was to show how the Midnight Dragon might perform in the real world with commonly available higher-end ammunition. Again, the barrel was generally warm, and I only paused between groups to reload. My shooting cadence was about one round every other second.\r\n\r\nThe worst of my five-shot groups came with Hornady\u2019s range-grade 62-grain Black FMJs, but it was still only 1.5 inches. My best group measured just 0.3 inches with Hornady\u2019s 68-grain Match BTHPs until human error produced a flyer. But 0.3 inches is impressive for four shots. Especially when you consider that, though I spent 15 years on active duty in the Army, I think of myself as more of a handgunner than a rifleman. In other words, I\u2019m no PRS shooter. The Midnight Dragon is just that good. Give the rifle with a steady platform and it will hit what you point it at with ego-killing precision.\r\n\r\nIf used as a varmint gun, for example, or to engage any target that can be stopped with the .223 Remington or 5.56mm NATO, 0.3 to 1.5 MOA is plenty acceptable, especially if that 1.5 MOA can be achieved with common range ammo. Even the military-surplus 77-grain IMI rounds produced a group less than 1 MOA.\r\n

    DoubleStar Midnight Dragon: Worth The Weight<\/h3>\r\nAre there any drawbacks with the Midnight Dragon? For me at least, it has been slightly difficult to transport. At just over 42 inches in total length, the Midnight Dragon needs a spacious den. It\u2019s also hefty\u2014perfect for bench shooting, but not ideal for a long hike. These drawbacks are rather insignificant, however, when you\u2019re after a distant target or varmint. Transportability could easily be enhanced with a folding stock mechanism like those offered by Law Tactical.\r\n\r\nI\u2019ve also never experienced a single malfunction with the Midnight Dragon, even with loose rounds from the bottom of an old range bag. It\u2019s clear DoubleStar already knew how to make a reliable rifle. The inclusion and proper installation of a custom Shaw barrel into a host engineered exactly for a shooter to take advantage of such a barrel has made for one heck of a rifle. The attention to detail that went into something as simple as properly staking the gas key has obviously gone into the construction of the rest of the rifle. The folks at DoubleStar aren\u2019t just assembling rifles\u2014they\u2019re manufacturing, smithing and perfecting them<\/a>.\r\n\r\nIf the Midnight Dragon has inspired you to simply order a Shaw barrel matching this profile, I have some bad news. As of this writing, Shaw does not publicly list a bull barrel like this one on its own, even using the company\u2019s custom ordering system. The closest I could find was over $400. That\u2019s more than one third the MSRP of the Midnight Dragon. But even if you built your own Midnight Dragon clone, it wouldn\u2019t come with DoubleStar\u2019s lifetime warranty. So maybe get it straight from the source.\r\n\r\nFor more information, visit star15.com<\/a>.\r\n

    DoubleStar Midnight Dragon Specifications<\/h3>\r\n

    \r\n \t
    • Caliber: 5.56mm NATO<\/li>\r\n \t
    • Barrel: 24 inches<\/li>\r\n \t
    • OA Length: 42.25 inches<\/li>\r\n \t
    • Weight: 9.55 pounds (empty)<\/li>\r\n \t
    • Stock: ACE ARFX<\/li>\r\n \t
    • Sights: None<\/li>\r\n \t
    • Action: Direct impingement semi-auto<\/li>\r\n \t
    • Finish: Matte black<\/li>\r\n \t
    • Capacity: 5+1<\/li>\r\n \t
    • MSRP: $1,116<\/li>\r\n<\/ul>\r\n

      DoubleStar Midnight Dragon Accuracy Results<\/h3>\r\nLoad: Accuracy<\/strong>\r\n

      \r\n \t
      • Hornady 62 Black FMJ: 1.50<\/li>\r\n \t
      • Hornady 68 Match BTHP: 0.30<\/li>\r\n \t
      • IMI Systems 77 OTM: 0.90<\/li>\r\n \t
      • Nosler 35 Varmint: 1.40<\/li>\r\n \t
      • Nosler 60 Ballistic Tip: 0.75<\/li>\r\n<\/ul>\r\nBullet weight measured in grains and accuracy in inches for best five-shot groups at 100 yards.\r\n\r\nThis article is from the 2019 issue of Black Guns magazine. Grab your copy at OutdoorGroupStore.com<\/a>.\r\n\r\n ","post_title":"TESTED: DoubleStar Midnight Dragon Brings Custom Features to AR-15","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"doublestar-midnight-dragon","to_ping":"","pinged":"","post_modified":"2023-05-31 16:19:38","post_modified_gmt":"2023-05-31 16:19:38","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/03\/doublestar-midnight-dragon\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":39},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
        Page 39 of 109 Previous 1 … 38 39 40 … 109 Next

        POPULAR

        No Content Available

        BROWSE BY BRAND

        

        

        

        

        

        

        

        
        \n

        I know what you are thinking because I thought it also: \"How do I get my hands on one of these?\"<\/p>\n\n\n\n

        The answer is simple, you can\u2019t, not unless you have a real need like owning a giant kiln. Industrial customers have the option to purchase or lease the MasterBlaster direct from Remington, but a normal consumer can not get their hands on one. Sorry.<\/p>\n\n\n\n

        There are at least 200 of these industrial guns out in the field in the U.S. and around 100 overseas. Remington services all of them in Lonoke, Ark. Remington also fabricates around 25 new MasterBlasters a year. Most industrial customers have their industrial gun for many years before it needs to be rebuilt or replaced.<\/p>\n\n\n\n

        I was honored to have the opportunity to shoot one of these incredibly badass tools. It is a perfect example of the \"see a need, fill a need\" mentality that Remington uses in every one of its firearms and rounds of ammunition it puts its name on.<\/p>\n\n\n\n

        If you are an industrial customer that needs more information on an industrial gun, you can contact Remington's Industrial 8-gauge department at 501-676-4150.<\/p>\n","post_title":"Gun Test: Hands On the Remington MasterBlaster 8-Gauge Industrial Gun","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"open","post_password":"","post_name":"remington-masterblaster-industrial-gun","to_ping":"","pinged":"","post_modified":"2024-12-02 14:42:57","post_modified_gmt":"2024-12-02 19:42:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/04\/remington-masterblaster-industrial-gun\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":129786,"post_author":"882","post_date":"2018-12-03 07:03:38","post_date_gmt":"2018-12-03 12:03:38","post_content":"

        
        
        \r\n\r\nThe DoubleStar Midnight Dragon started with the barrel. Just as the legendary A-10 Warthog, which has saved my life, is said to have been built around the GAU-8 Gatling gun, the Midnight Dragon was built around the barrel. That statement makes sense for every AR. If mil-spec upper and lower receivers are used, with a mil-spec bolt carrier group, what else can make a real difference in terms of accuracy? It\u2019s always about the barrel.\r\n\r\n[in_content post=\"200212\" alignment=\"align-left\" \/]\r\n\r\nDoubleStar was looking to take the 5.56mm NATO to its accuracy limits in the AR platform while keeping the rifle within financial reach of the average dedicated shooter. DoubleStar starts with a custom, spiral-fluted, 24-inch Shaw barrel made from 416 stainless steel with a 1-in-8-inch twist rate and completes the build with a blend of carefully selected parts. Like the barrel, the most important parts were purposefully chosen to create the best shooter experience.\r\n

        Built-In Features<\/h3>\r\nI hadn\u2019t heard of Cedar Enterprises before, but the company\u2019s two-stage trigger is superb. Described as breaking between 4.2 and 4.6 pounds, it feels like rolling a ball bearing against a strand of glass no thicker than a spaghetti noodle. And yet, cosmetically, the trigger doesn\u2019t look any different on the exterior than another mil-spec trigger unit.\r\n\r\nCompleting the user interface is the beard-friendly ACE ARFX stock and the very comfortable Ergo Tactical Deluxe grip. The ACE ARFX is a clean design with a simple foam sleeve over the buffer tube. This foam is soft to the cheek and also makes for a comfortable interface regardless of temperature. The Ergo pistol grip is contoured with a palm swell and comes with a removable shelf. The shelf supports your hand and inspires a more relaxed grip for firing\u2014something that promotes fine motor control, a necessity for taking advantage of the Midnight Dragon\u2019s trigger.\r\n\r\nThe elements combine with the forged aircraft-grade 7075-T6 aluminum receivers for a substantial weight of 9.55 pounds, which makes for a very enjoyable shooting experience. Despite the lack of a muzzle device, perceived recoil is practically non-existent. What isn\u2019t absorbed by the rifle\u2019s weight is transferred gently to the shooter through the rubberized grip and buttplate. Any shift or movement of the gun under your cheek is masked by the soft foam-covered buffer tube. In short, DoubleStar has removed just about any excuse for poor shooting results. This puts a surprising amount of pressure on the shooter. If you miss, you\u2019ll be hard pressed to find an excuse outside of shooter error.\r\n

        Previous Testing<\/h3>\r\nIt may spoil the review, but I must mention what drove my excitement about this rifle. A few months ago, I hit the range with a shooting partner to test some different loads through this gun. Although some will argue that specific twist rates can only do well with specific bullet weights, I haven\u2019t found that to matter as much at 100 yards as long as the ammo itself is consistent.\r\n\r\nI agree that matching the projectile weight to the twist rate can make or break a rifle\u2019s accuracy, but the difference at 100 yards is minimal if the projectile is concentric and the powder charge is consistent. My experience has been that ammunition quality is more important than matching the projectile weight with the twist rate.\r\n\r\nOn this particular day, we were making our way through a variety of different loads with 62-grain projectiles. Our intent was to find the differences between projectiles of different brands. Sometimes a rifle just likes a specific loading from one specific manufacturer. I learned this in my early rifle days when my Marlin had a particular favorite, even among match ammunition.\r\n

        Running Hot<\/h3>\r\nIt was a hot day, and the barrel was warm after our fifth 10-shot group. We only paused between groups to reload. Using a Caldwell Stinger rest, and the rifle was equipped with Nikon\u2019s 4-16x50mm Black X1000 scope in a Warne XSKEL mount. We loaded 10 Nosler 62-grain Varmageddon FBHP rounds. I fired five shots, my partner fired five, and we achieved an incredible result: a ragged hole about half an inch wide.\r\n\r\nIt\u2019s safe to say that the DoubleStar Midnight Dragon and Nosler\u2019s 62-grain Varmageddon ammo made for a good pairing. A more frustrating note is that I now find myself chasing that group every time I go out to the range, and the Midnight Dragon has set the standard for what I expect from any rifle supposedly built for accuracy. It\u2019s one thing to know a group is possible; it\u2019s another to have shot it and want to shoot it again. On a good range day, I can achieve these results again with the Midnight Dragon and Nosler ammo, and I\u2019ve often been disappointed when other \u201caccurized\u201d rifles haven\u2019t gotten nearly as close. For that reason, I\u2019m just as excited to head to the range with the Midnight Dragon now as when it was first announced in 2013.\r\n

        DoubleStar Midnight Dragon Results<\/h3>\r\nI wanted to see how the rifle would run with a wider variety of loads and manufacturers. For this review, I tested each load by firing a single five-shot group at 100 yards, and once again, I used a Caldwell Stinger rest. I also used the same Nikon scope but installed it in a Nikon mount this time around. The Black FX1000 is a first-focal-plane scope that I have come to enjoy for groupings because it makes the job easy. You can quickly make adjustments regardless of the magnification level.\r\n\r\nMy intent with this test was to show how the Midnight Dragon might perform in the real world with commonly available higher-end ammunition. Again, the barrel was generally warm, and I only paused between groups to reload. My shooting cadence was about one round every other second.\r\n\r\nThe worst of my five-shot groups came with Hornady\u2019s range-grade 62-grain Black FMJs, but it was still only 1.5 inches. My best group measured just 0.3 inches with Hornady\u2019s 68-grain Match BTHPs until human error produced a flyer. But 0.3 inches is impressive for four shots. Especially when you consider that, though I spent 15 years on active duty in the Army, I think of myself as more of a handgunner than a rifleman. In other words, I\u2019m no PRS shooter. The Midnight Dragon is just that good. Give the rifle with a steady platform and it will hit what you point it at with ego-killing precision.\r\n\r\nIf used as a varmint gun, for example, or to engage any target that can be stopped with the .223 Remington or 5.56mm NATO, 0.3 to 1.5 MOA is plenty acceptable, especially if that 1.5 MOA can be achieved with common range ammo. Even the military-surplus 77-grain IMI rounds produced a group less than 1 MOA.\r\n

        DoubleStar Midnight Dragon: Worth The Weight<\/h3>\r\nAre there any drawbacks with the Midnight Dragon? For me at least, it has been slightly difficult to transport. At just over 42 inches in total length, the Midnight Dragon needs a spacious den. It\u2019s also hefty\u2014perfect for bench shooting, but not ideal for a long hike. These drawbacks are rather insignificant, however, when you\u2019re after a distant target or varmint. Transportability could easily be enhanced with a folding stock mechanism like those offered by Law Tactical.\r\n\r\nI\u2019ve also never experienced a single malfunction with the Midnight Dragon, even with loose rounds from the bottom of an old range bag. It\u2019s clear DoubleStar already knew how to make a reliable rifle. The inclusion and proper installation of a custom Shaw barrel into a host engineered exactly for a shooter to take advantage of such a barrel has made for one heck of a rifle. The attention to detail that went into something as simple as properly staking the gas key has obviously gone into the construction of the rest of the rifle. The folks at DoubleStar aren\u2019t just assembling rifles\u2014they\u2019re manufacturing, smithing and perfecting them<\/a>.\r\n\r\nIf the Midnight Dragon has inspired you to simply order a Shaw barrel matching this profile, I have some bad news. As of this writing, Shaw does not publicly list a bull barrel like this one on its own, even using the company\u2019s custom ordering system. The closest I could find was over $400. That\u2019s more than one third the MSRP of the Midnight Dragon. But even if you built your own Midnight Dragon clone, it wouldn\u2019t come with DoubleStar\u2019s lifetime warranty. So maybe get it straight from the source.\r\n\r\nFor more information, visit star15.com<\/a>.\r\n

        DoubleStar Midnight Dragon Specifications<\/h3>\r\n

        \r\n \t
        • Caliber: 5.56mm NATO<\/li>\r\n \t
        • Barrel: 24 inches<\/li>\r\n \t
        • OA Length: 42.25 inches<\/li>\r\n \t
        • Weight: 9.55 pounds (empty)<\/li>\r\n \t
        • Stock: ACE ARFX<\/li>\r\n \t
        • Sights: None<\/li>\r\n \t
        • Action: Direct impingement semi-auto<\/li>\r\n \t
        • Finish: Matte black<\/li>\r\n \t
        • Capacity: 5+1<\/li>\r\n \t
        • MSRP: $1,116<\/li>\r\n<\/ul>\r\n

          DoubleStar Midnight Dragon Accuracy Results<\/h3>\r\nLoad: Accuracy<\/strong>\r\n

          \r\n \t
          • Hornady 62 Black FMJ: 1.50<\/li>\r\n \t
          • Hornady 68 Match BTHP: 0.30<\/li>\r\n \t
          • IMI Systems 77 OTM: 0.90<\/li>\r\n \t
          • Nosler 35 Varmint: 1.40<\/li>\r\n \t
          • Nosler 60 Ballistic Tip: 0.75<\/li>\r\n<\/ul>\r\nBullet weight measured in grains and accuracy in inches for best five-shot groups at 100 yards.\r\n\r\nThis article is from the 2019 issue of Black Guns magazine. Grab your copy at OutdoorGroupStore.com<\/a>.\r\n\r\n ","post_title":"TESTED: DoubleStar Midnight Dragon Brings Custom Features to AR-15","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"doublestar-midnight-dragon","to_ping":"","pinged":"","post_modified":"2023-05-31 16:19:38","post_modified_gmt":"2023-05-31 16:19:38","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/03\/doublestar-midnight-dragon\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":39},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
            Page 39 of 109 Previous 1 … 38 39 40 … 109 Next

            POPULAR

            No Content Available

            BROWSE BY BRAND

            

            

            

            

            

            

            

            
            \n

            How Do I Get One?<\/h3>\n\n\n\n

            I know what you are thinking because I thought it also: \"How do I get my hands on one of these?\"<\/p>\n\n\n\n

            The answer is simple, you can\u2019t, not unless you have a real need like owning a giant kiln. Industrial customers have the option to purchase or lease the MasterBlaster direct from Remington, but a normal consumer can not get their hands on one. Sorry.<\/p>\n\n\n\n

            There are at least 200 of these industrial guns out in the field in the U.S. and around 100 overseas. Remington services all of them in Lonoke, Ark. Remington also fabricates around 25 new MasterBlasters a year. Most industrial customers have their industrial gun for many years before it needs to be rebuilt or replaced.<\/p>\n\n\n\n

            I was honored to have the opportunity to shoot one of these incredibly badass tools. It is a perfect example of the \"see a need, fill a need\" mentality that Remington uses in every one of its firearms and rounds of ammunition it puts its name on.<\/p>\n\n\n\n

            If you are an industrial customer that needs more information on an industrial gun, you can contact Remington's Industrial 8-gauge department at 501-676-4150.<\/p>\n","post_title":"Gun Test: Hands On the Remington MasterBlaster 8-Gauge Industrial Gun","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"open","post_password":"","post_name":"remington-masterblaster-industrial-gun","to_ping":"","pinged":"","post_modified":"2024-12-02 14:42:57","post_modified_gmt":"2024-12-02 19:42:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/04\/remington-masterblaster-industrial-gun\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":129786,"post_author":"882","post_date":"2018-12-03 07:03:38","post_date_gmt":"2018-12-03 12:03:38","post_content":"

            
            

            \r\n\r\nThe DoubleStar Midnight Dragon started with the barrel. Just as the legendary A-10 Warthog, which has saved my life, is said to have been built around the GAU-8 Gatling gun, the Midnight Dragon was built around the barrel. That statement makes sense for every AR. If mil-spec upper and lower receivers are used, with a mil-spec bolt carrier group, what else can make a real difference in terms of accuracy? It\u2019s always about the barrel.\r\n\r\n[in_content post=\"200212\" alignment=\"align-left\" \/]\r\n\r\nDoubleStar was looking to take the 5.56mm NATO to its accuracy limits in the AR platform while keeping the rifle within financial reach of the average dedicated shooter. DoubleStar starts with a custom, spiral-fluted, 24-inch Shaw barrel made from 416 stainless steel with a 1-in-8-inch twist rate and completes the build with a blend of carefully selected parts. Like the barrel, the most important parts were purposefully chosen to create the best shooter experience.\r\n

            Built-In Features<\/h3>\r\nI hadn\u2019t heard of Cedar Enterprises before, but the company\u2019s two-stage trigger is superb. Described as breaking between 4.2 and 4.6 pounds, it feels like rolling a ball bearing against a strand of glass no thicker than a spaghetti noodle. And yet, cosmetically, the trigger doesn\u2019t look any different on the exterior than another mil-spec trigger unit.\r\n\r\nCompleting the user interface is the beard-friendly ACE ARFX stock and the very comfortable Ergo Tactical Deluxe grip. The ACE ARFX is a clean design with a simple foam sleeve over the buffer tube. This foam is soft to the cheek and also makes for a comfortable interface regardless of temperature. The Ergo pistol grip is contoured with a palm swell and comes with a removable shelf. The shelf supports your hand and inspires a more relaxed grip for firing\u2014something that promotes fine motor control, a necessity for taking advantage of the Midnight Dragon\u2019s trigger.\r\n\r\nThe elements combine with the forged aircraft-grade 7075-T6 aluminum receivers for a substantial weight of 9.55 pounds, which makes for a very enjoyable shooting experience. Despite the lack of a muzzle device, perceived recoil is practically non-existent. What isn\u2019t absorbed by the rifle\u2019s weight is transferred gently to the shooter through the rubberized grip and buttplate. Any shift or movement of the gun under your cheek is masked by the soft foam-covered buffer tube. In short, DoubleStar has removed just about any excuse for poor shooting results. This puts a surprising amount of pressure on the shooter. If you miss, you\u2019ll be hard pressed to find an excuse outside of shooter error.\r\n

            Previous Testing<\/h3>\r\nIt may spoil the review, but I must mention what drove my excitement about this rifle. A few months ago, I hit the range with a shooting partner to test some different loads through this gun. Although some will argue that specific twist rates can only do well with specific bullet weights, I haven\u2019t found that to matter as much at 100 yards as long as the ammo itself is consistent.\r\n\r\nI agree that matching the projectile weight to the twist rate can make or break a rifle\u2019s accuracy, but the difference at 100 yards is minimal if the projectile is concentric and the powder charge is consistent. My experience has been that ammunition quality is more important than matching the projectile weight with the twist rate.\r\n\r\nOn this particular day, we were making our way through a variety of different loads with 62-grain projectiles. Our intent was to find the differences between projectiles of different brands. Sometimes a rifle just likes a specific loading from one specific manufacturer. I learned this in my early rifle days when my Marlin had a particular favorite, even among match ammunition.\r\n

            Running Hot<\/h3>\r\nIt was a hot day, and the barrel was warm after our fifth 10-shot group. We only paused between groups to reload. Using a Caldwell Stinger rest, and the rifle was equipped with Nikon\u2019s 4-16x50mm Black X1000 scope in a Warne XSKEL mount. We loaded 10 Nosler 62-grain Varmageddon FBHP rounds. I fired five shots, my partner fired five, and we achieved an incredible result: a ragged hole about half an inch wide.\r\n\r\nIt\u2019s safe to say that the DoubleStar Midnight Dragon and Nosler\u2019s 62-grain Varmageddon ammo made for a good pairing. A more frustrating note is that I now find myself chasing that group every time I go out to the range, and the Midnight Dragon has set the standard for what I expect from any rifle supposedly built for accuracy. It\u2019s one thing to know a group is possible; it\u2019s another to have shot it and want to shoot it again. On a good range day, I can achieve these results again with the Midnight Dragon and Nosler ammo, and I\u2019ve often been disappointed when other \u201caccurized\u201d rifles haven\u2019t gotten nearly as close. For that reason, I\u2019m just as excited to head to the range with the Midnight Dragon now as when it was first announced in 2013.\r\n

            DoubleStar Midnight Dragon Results<\/h3>\r\nI wanted to see how the rifle would run with a wider variety of loads and manufacturers. For this review, I tested each load by firing a single five-shot group at 100 yards, and once again, I used a Caldwell Stinger rest. I also used the same Nikon scope but installed it in a Nikon mount this time around. The Black FX1000 is a first-focal-plane scope that I have come to enjoy for groupings because it makes the job easy. You can quickly make adjustments regardless of the magnification level.\r\n\r\nMy intent with this test was to show how the Midnight Dragon might perform in the real world with commonly available higher-end ammunition. Again, the barrel was generally warm, and I only paused between groups to reload. My shooting cadence was about one round every other second.\r\n\r\nThe worst of my five-shot groups came with Hornady\u2019s range-grade 62-grain Black FMJs, but it was still only 1.5 inches. My best group measured just 0.3 inches with Hornady\u2019s 68-grain Match BTHPs until human error produced a flyer. But 0.3 inches is impressive for four shots. Especially when you consider that, though I spent 15 years on active duty in the Army, I think of myself as more of a handgunner than a rifleman. In other words, I\u2019m no PRS shooter. The Midnight Dragon is just that good. Give the rifle with a steady platform and it will hit what you point it at with ego-killing precision.\r\n\r\nIf used as a varmint gun, for example, or to engage any target that can be stopped with the .223 Remington or 5.56mm NATO, 0.3 to 1.5 MOA is plenty acceptable, especially if that 1.5 MOA can be achieved with common range ammo. Even the military-surplus 77-grain IMI rounds produced a group less than 1 MOA.\r\n

            DoubleStar Midnight Dragon: Worth The Weight<\/h3>\r\nAre there any drawbacks with the Midnight Dragon? For me at least, it has been slightly difficult to transport. At just over 42 inches in total length, the Midnight Dragon needs a spacious den. It\u2019s also hefty\u2014perfect for bench shooting, but not ideal for a long hike. These drawbacks are rather insignificant, however, when you\u2019re after a distant target or varmint. Transportability could easily be enhanced with a folding stock mechanism like those offered by Law Tactical.\r\n\r\nI\u2019ve also never experienced a single malfunction with the Midnight Dragon, even with loose rounds from the bottom of an old range bag. It\u2019s clear DoubleStar already knew how to make a reliable rifle. The inclusion and proper installation of a custom Shaw barrel into a host engineered exactly for a shooter to take advantage of such a barrel has made for one heck of a rifle. The attention to detail that went into something as simple as properly staking the gas key has obviously gone into the construction of the rest of the rifle. The folks at DoubleStar aren\u2019t just assembling rifles\u2014they\u2019re manufacturing, smithing and perfecting them<\/a>.\r\n\r\nIf the Midnight Dragon has inspired you to simply order a Shaw barrel matching this profile, I have some bad news. As of this writing, Shaw does not publicly list a bull barrel like this one on its own, even using the company\u2019s custom ordering system. The closest I could find was over $400. That\u2019s more than one third the MSRP of the Midnight Dragon. But even if you built your own Midnight Dragon clone, it wouldn\u2019t come with DoubleStar\u2019s lifetime warranty. So maybe get it straight from the source.\r\n\r\nFor more information, visit star15.com<\/a>.\r\n

            DoubleStar Midnight Dragon Specifications<\/h3>\r\n

            \r\n \t
            • Caliber: 5.56mm NATO<\/li>\r\n \t
            • Barrel: 24 inches<\/li>\r\n \t
            • OA Length: 42.25 inches<\/li>\r\n \t
            • Weight: 9.55 pounds (empty)<\/li>\r\n \t
            • Stock: ACE ARFX<\/li>\r\n \t
            • Sights: None<\/li>\r\n \t
            • Action: Direct impingement semi-auto<\/li>\r\n \t
            • Finish: Matte black<\/li>\r\n \t
            • Capacity: 5+1<\/li>\r\n \t
            • MSRP: $1,116<\/li>\r\n<\/ul>\r\n

              DoubleStar Midnight Dragon Accuracy Results<\/h3>\r\nLoad: Accuracy<\/strong>\r\n

              \r\n \t
              • Hornady 62 Black FMJ: 1.50<\/li>\r\n \t
              • Hornady 68 Match BTHP: 0.30<\/li>\r\n \t
              • IMI Systems 77 OTM: 0.90<\/li>\r\n \t
              • Nosler 35 Varmint: 1.40<\/li>\r\n \t
              • Nosler 60 Ballistic Tip: 0.75<\/li>\r\n<\/ul>\r\nBullet weight measured in grains and accuracy in inches for best five-shot groups at 100 yards.\r\n\r\nThis article is from the 2019 issue of Black Guns magazine. Grab your copy at OutdoorGroupStore.com<\/a>.\r\n\r\n ","post_title":"TESTED: DoubleStar Midnight Dragon Brings Custom Features to AR-15","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"doublestar-midnight-dragon","to_ping":"","pinged":"","post_modified":"2023-05-31 16:19:38","post_modified_gmt":"2023-05-31 16:19:38","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/03\/doublestar-midnight-dragon\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":39},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
                Page 39 of 109 Previous 1 … 38 39 40 … 109 Next

                POPULAR

                No Content Available

                BROWSE BY BRAND

                

                

                

                

                

                

                

                
                \n

                Remington\u2019s latest industrial gun is the most effective, sophisticated multi-industry tool of its kind. Built like an artillery piece, Remington developed the MasterBlaster to withstand the most severe kiln conditions. Four-and-a-half tons of muzzle energy enable a 3-ounce lead magnum or 2-ounce and 3 once zinc payloads to deliver knockout punches accurately out to 300 feet. There is no industrial gun in the entire world that is more powerful, more accurate, and safer.<\/p>\n\n\n\n

                How Do I Get One?<\/h3>\n\n\n\n

                I know what you are thinking because I thought it also: \"How do I get my hands on one of these?\"<\/p>\n\n\n\n

                The answer is simple, you can\u2019t, not unless you have a real need like owning a giant kiln. Industrial customers have the option to purchase or lease the MasterBlaster direct from Remington, but a normal consumer can not get their hands on one. Sorry.<\/p>\n\n\n\n

                There are at least 200 of these industrial guns out in the field in the U.S. and around 100 overseas. Remington services all of them in Lonoke, Ark. Remington also fabricates around 25 new MasterBlasters a year. Most industrial customers have their industrial gun for many years before it needs to be rebuilt or replaced.<\/p>\n\n\n\n

                I was honored to have the opportunity to shoot one of these incredibly badass tools. It is a perfect example of the \"see a need, fill a need\" mentality that Remington uses in every one of its firearms and rounds of ammunition it puts its name on.<\/p>\n\n\n\n

                If you are an industrial customer that needs more information on an industrial gun, you can contact Remington's Industrial 8-gauge department at 501-676-4150.<\/p>\n","post_title":"Gun Test: Hands On the Remington MasterBlaster 8-Gauge Industrial Gun","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"open","post_password":"","post_name":"remington-masterblaster-industrial-gun","to_ping":"","pinged":"","post_modified":"2024-12-02 14:42:57","post_modified_gmt":"2024-12-02 19:42:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/04\/remington-masterblaster-industrial-gun\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":129786,"post_author":"882","post_date":"2018-12-03 07:03:38","post_date_gmt":"2018-12-03 12:03:38","post_content":"

                
                

                \r\n\r\nThe DoubleStar Midnight Dragon started with the barrel. Just as the legendary A-10 Warthog, which has saved my life, is said to have been built around the GAU-8 Gatling gun, the Midnight Dragon was built around the barrel. That statement makes sense for every AR. If mil-spec upper and lower receivers are used, with a mil-spec bolt carrier group, what else can make a real difference in terms of accuracy? It\u2019s always about the barrel.\r\n\r\n[in_content post=\"200212\" alignment=\"align-left\" \/]\r\n\r\nDoubleStar was looking to take the 5.56mm NATO to its accuracy limits in the AR platform while keeping the rifle within financial reach of the average dedicated shooter. DoubleStar starts with a custom, spiral-fluted, 24-inch Shaw barrel made from 416 stainless steel with a 1-in-8-inch twist rate and completes the build with a blend of carefully selected parts. Like the barrel, the most important parts were purposefully chosen to create the best shooter experience.\r\n

                Built-In Features<\/h3>\r\nI hadn\u2019t heard of Cedar Enterprises before, but the company\u2019s two-stage trigger is superb. Described as breaking between 4.2 and 4.6 pounds, it feels like rolling a ball bearing against a strand of glass no thicker than a spaghetti noodle. And yet, cosmetically, the trigger doesn\u2019t look any different on the exterior than another mil-spec trigger unit.\r\n\r\nCompleting the user interface is the beard-friendly ACE ARFX stock and the very comfortable Ergo Tactical Deluxe grip. The ACE ARFX is a clean design with a simple foam sleeve over the buffer tube. This foam is soft to the cheek and also makes for a comfortable interface regardless of temperature. The Ergo pistol grip is contoured with a palm swell and comes with a removable shelf. The shelf supports your hand and inspires a more relaxed grip for firing\u2014something that promotes fine motor control, a necessity for taking advantage of the Midnight Dragon\u2019s trigger.\r\n\r\nThe elements combine with the forged aircraft-grade 7075-T6 aluminum receivers for a substantial weight of 9.55 pounds, which makes for a very enjoyable shooting experience. Despite the lack of a muzzle device, perceived recoil is practically non-existent. What isn\u2019t absorbed by the rifle\u2019s weight is transferred gently to the shooter through the rubberized grip and buttplate. Any shift or movement of the gun under your cheek is masked by the soft foam-covered buffer tube. In short, DoubleStar has removed just about any excuse for poor shooting results. This puts a surprising amount of pressure on the shooter. If you miss, you\u2019ll be hard pressed to find an excuse outside of shooter error.\r\n

                Previous Testing<\/h3>\r\nIt may spoil the review, but I must mention what drove my excitement about this rifle. A few months ago, I hit the range with a shooting partner to test some different loads through this gun. Although some will argue that specific twist rates can only do well with specific bullet weights, I haven\u2019t found that to matter as much at 100 yards as long as the ammo itself is consistent.\r\n\r\nI agree that matching the projectile weight to the twist rate can make or break a rifle\u2019s accuracy, but the difference at 100 yards is minimal if the projectile is concentric and the powder charge is consistent. My experience has been that ammunition quality is more important than matching the projectile weight with the twist rate.\r\n\r\nOn this particular day, we were making our way through a variety of different loads with 62-grain projectiles. Our intent was to find the differences between projectiles of different brands. Sometimes a rifle just likes a specific loading from one specific manufacturer. I learned this in my early rifle days when my Marlin had a particular favorite, even among match ammunition.\r\n

                Running Hot<\/h3>\r\nIt was a hot day, and the barrel was warm after our fifth 10-shot group. We only paused between groups to reload. Using a Caldwell Stinger rest, and the rifle was equipped with Nikon\u2019s 4-16x50mm Black X1000 scope in a Warne XSKEL mount. We loaded 10 Nosler 62-grain Varmageddon FBHP rounds. I fired five shots, my partner fired five, and we achieved an incredible result: a ragged hole about half an inch wide.\r\n\r\nIt\u2019s safe to say that the DoubleStar Midnight Dragon and Nosler\u2019s 62-grain Varmageddon ammo made for a good pairing. A more frustrating note is that I now find myself chasing that group every time I go out to the range, and the Midnight Dragon has set the standard for what I expect from any rifle supposedly built for accuracy. It\u2019s one thing to know a group is possible; it\u2019s another to have shot it and want to shoot it again. On a good range day, I can achieve these results again with the Midnight Dragon and Nosler ammo, and I\u2019ve often been disappointed when other \u201caccurized\u201d rifles haven\u2019t gotten nearly as close. For that reason, I\u2019m just as excited to head to the range with the Midnight Dragon now as when it was first announced in 2013.\r\n

                DoubleStar Midnight Dragon Results<\/h3>\r\nI wanted to see how the rifle would run with a wider variety of loads and manufacturers. For this review, I tested each load by firing a single five-shot group at 100 yards, and once again, I used a Caldwell Stinger rest. I also used the same Nikon scope but installed it in a Nikon mount this time around. The Black FX1000 is a first-focal-plane scope that I have come to enjoy for groupings because it makes the job easy. You can quickly make adjustments regardless of the magnification level.\r\n\r\nMy intent with this test was to show how the Midnight Dragon might perform in the real world with commonly available higher-end ammunition. Again, the barrel was generally warm, and I only paused between groups to reload. My shooting cadence was about one round every other second.\r\n\r\nThe worst of my five-shot groups came with Hornady\u2019s range-grade 62-grain Black FMJs, but it was still only 1.5 inches. My best group measured just 0.3 inches with Hornady\u2019s 68-grain Match BTHPs until human error produced a flyer. But 0.3 inches is impressive for four shots. Especially when you consider that, though I spent 15 years on active duty in the Army, I think of myself as more of a handgunner than a rifleman. In other words, I\u2019m no PRS shooter. The Midnight Dragon is just that good. Give the rifle with a steady platform and it will hit what you point it at with ego-killing precision.\r\n\r\nIf used as a varmint gun, for example, or to engage any target that can be stopped with the .223 Remington or 5.56mm NATO, 0.3 to 1.5 MOA is plenty acceptable, especially if that 1.5 MOA can be achieved with common range ammo. Even the military-surplus 77-grain IMI rounds produced a group less than 1 MOA.\r\n

                DoubleStar Midnight Dragon: Worth The Weight<\/h3>\r\nAre there any drawbacks with the Midnight Dragon? For me at least, it has been slightly difficult to transport. At just over 42 inches in total length, the Midnight Dragon needs a spacious den. It\u2019s also hefty\u2014perfect for bench shooting, but not ideal for a long hike. These drawbacks are rather insignificant, however, when you\u2019re after a distant target or varmint. Transportability could easily be enhanced with a folding stock mechanism like those offered by Law Tactical.\r\n\r\nI\u2019ve also never experienced a single malfunction with the Midnight Dragon, even with loose rounds from the bottom of an old range bag. It\u2019s clear DoubleStar already knew how to make a reliable rifle. The inclusion and proper installation of a custom Shaw barrel into a host engineered exactly for a shooter to take advantage of such a barrel has made for one heck of a rifle. The attention to detail that went into something as simple as properly staking the gas key has obviously gone into the construction of the rest of the rifle. The folks at DoubleStar aren\u2019t just assembling rifles\u2014they\u2019re manufacturing, smithing and perfecting them<\/a>.\r\n\r\nIf the Midnight Dragon has inspired you to simply order a Shaw barrel matching this profile, I have some bad news. As of this writing, Shaw does not publicly list a bull barrel like this one on its own, even using the company\u2019s custom ordering system. The closest I could find was over $400. That\u2019s more than one third the MSRP of the Midnight Dragon. But even if you built your own Midnight Dragon clone, it wouldn\u2019t come with DoubleStar\u2019s lifetime warranty. So maybe get it straight from the source.\r\n\r\nFor more information, visit star15.com<\/a>.\r\n

                DoubleStar Midnight Dragon Specifications<\/h3>\r\n

                \r\n \t
                • Caliber: 5.56mm NATO<\/li>\r\n \t
                • Barrel: 24 inches<\/li>\r\n \t
                • OA Length: 42.25 inches<\/li>\r\n \t
                • Weight: 9.55 pounds (empty)<\/li>\r\n \t
                • Stock: ACE ARFX<\/li>\r\n \t
                • Sights: None<\/li>\r\n \t
                • Action: Direct impingement semi-auto<\/li>\r\n \t
                • Finish: Matte black<\/li>\r\n \t
                • Capacity: 5+1<\/li>\r\n \t
                • MSRP: $1,116<\/li>\r\n<\/ul>\r\n

                  DoubleStar Midnight Dragon Accuracy Results<\/h3>\r\nLoad: Accuracy<\/strong>\r\n

                  \r\n \t
                  • Hornady 62 Black FMJ: 1.50<\/li>\r\n \t
                  • Hornady 68 Match BTHP: 0.30<\/li>\r\n \t
                  • IMI Systems 77 OTM: 0.90<\/li>\r\n \t
                  • Nosler 35 Varmint: 1.40<\/li>\r\n \t
                  • Nosler 60 Ballistic Tip: 0.75<\/li>\r\n<\/ul>\r\nBullet weight measured in grains and accuracy in inches for best five-shot groups at 100 yards.\r\n\r\nThis article is from the 2019 issue of Black Guns magazine. Grab your copy at OutdoorGroupStore.com<\/a>.\r\n\r\n ","post_title":"TESTED: DoubleStar Midnight Dragon Brings Custom Features to AR-15","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"doublestar-midnight-dragon","to_ping":"","pinged":"","post_modified":"2023-05-31 16:19:38","post_modified_gmt":"2023-05-31 16:19:38","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/12\/03\/doublestar-midnight-dragon\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":true,"total_page":39},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
                    Page 39 of 109 Previous 1 … 38 39 40 … 109 Next

                    POPULAR

                    No Content Available

                    BROWSE BY BRAND

                    

                    

                    

                    

                    

                    

                    

                    
                    \n