![\"UTG](\"https:\/\/www.dev.athlonoutdoors.com\/wp-content\/uploads\/2017\/01\/rails-21-UTG-Pro-M_LOK.jpg\")
<\/figure>\n\n\n\nThese handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
<\/figure>\n\n\n\nThese handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The original Engage pistol grip from Mission First Tactical (MFT) has finger grooves and texturing to provide a positive grip. There is a built-in watertight storage compartment on the bottom. The company\u2019s V2 renditions have 15-degree angles for improved control and handling ergonomics. Both grips are available in black, and Scorched Dark Earth. missionfirsttactical.com<\/a><\/p>\n\n\n\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The original Engage pistol grip from Mission First Tactical (MFT) has finger grooves and texturing to provide a positive grip. There is a built-in watertight storage compartment on the bottom. The company\u2019s V2 renditions have 15-degree angles for improved control and handling ergonomics. Both grips are available in black, and Scorched Dark Earth. missionfirsttactical.com<\/a><\/p>\n\n\n\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\n The original Engage pistol grip from Mission First Tactical (MFT) has finger grooves and texturing to provide a positive grip. There is a built-in watertight storage compartment on the bottom. The company\u2019s V2 renditions have 15-degree angles for improved control and handling ergonomics. Both grips are available in black, and Scorched Dark Earth. missionfirsttactical.com<\/a><\/p>\n\n\n\n The Stark One rifle grip incorporates a sling mount above the hand and below the buffer tube. Two versions are available: one with a hook mount and one with a swivel mount. The rifle grip is compatible with M4-style adjustable stocks, even when the stock is fully collapsed. The grip itself fits a variety of hand sizes, and the integrated triggerguard is oversized for use with gloves. starkequipment.com<\/a><\/p>\n\n\n\n The soft, hand-filling BG-17 Battlegrip is the big brother of the company\u2019s BG-16. The extended backstrap and beavertail is intended for large-handed shooters. The soft rubber exterior provides extra control and reduces felt recoil. A small weather-resistant storage compartment is located inside. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n The Flip Grip quickly adjusts to offer a 24-degree rake or a vertical grip angle. To adjust the grip style, just pull down on the grip and rotate it 180 degrees. It automatically locks in place. The grip is an ultra-tough polymer with an aggressive, non-slip texture. Black and Flat Dark Earth versions are available. tangodown.com<\/a><\/p>\n\n\n\n These handguards are designed for .308 ARs like the Smith & Wesson M&P10, the DPMS LR-308, and other similar variants. These handguards are ultra-lightweight and have an octagonal profile and scalloped edges for easy, snag-free mounting of accessories. leapers.com<\/a><\/p>\n","post_title":"Top 16 Aftermarket AR Grips & Rails","post_excerpt":"Foregrips, handguards and pistol grips from Bravo Company, Ergo, Hogue, Troy and more to help you increase the control and precision of your AR rifle.","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"ar-rifle-grips-rails","to_ping":"","pinged":"","post_modified":"2023-10-31 22:58:17","post_modified_gmt":"2023-11-01 02:58:17","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2017\/01\/11\/ar-rifle-grips-rails\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96330,"post_author":"351","post_date":"2018-07-25 09:00:45","post_date_gmt":"2018-07-25 13:00:45","post_content":"\r\n\r\nHogue has revealed its new\u00a0Composite Material Laser Enhanced (LE) grips for 1911<\/a>\u00a0pistols.\r\n\r\n[in_content post=\"101829\" alignment=\"align-left\" \/]\r\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
UTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
![\"TangoDown](\"https:\/\/www.dev.athlonoutdoors.com\/wp-content\/uploads\/2017\/01\/rails-22-TangoDown-BG_FG-Fl.jpg\")
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
TangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
TangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
![\"tangodown](\"https:\/\/www.dev.athlonoutdoors.com\/wp-content\/uploads\/2017\/01\/rails-18-TangoDown-BG_17-Ba.jpg\")
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
TangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
TangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
![\"stark](\"https:\/\/www.dev.athlonoutdoors.com\/wp-content\/uploads\/2017\/01\/rails-17-stark-se2_ar-SM_01.jpg\")
<\/figure>\n\n\n\nTangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
Stark One Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
Stark One Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
![\"mft](\"https:\/\/www.dev.athlonoutdoors.com\/wp-content\/uploads\/2017\/01\/rails-15-MFT-Pistol-Grip-Black.jpg\")
<\/figure>\n\n\n\nStark One Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
BROWSE BY BRAND
MFT Engage Grips<\/h3>\n\n\n\n
<\/figure>\n\n\n\nStark One Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-17 Battlegrip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nTangoDown BG-FG Flip-Grip<\/h3>\n\n\n\n
<\/figure>\n\n\n\nUTG Pro M-LOK Super Slim Handguards<\/h3>\n\n\n\n
<\/figure>\n\n\n\nHogue's New 1911 Grips<\/h3>\r\n\u201cOur popular Laser Enhanced 1911 grips are now available with precision cut piranha grip textured G10 or finely checkered reinforced wood laminate materials,\u201d said Hogue's LE Grip designer and managing partner Jim Bruhns. \u201cIn addition, we have each variation available in both Government and Officer Model fits.\u201d\r\n\r\nIn the press release, Hogue says its LE grips have fully programmable, digitally controlled microprocessor circuit. The company's designers \"capitalized on this advantage,\" programming three different operating modes\u2014steady, flashing and stealth target\u2014as well as four brightness levels into the LE grip's circuit.\r\n\r\nIn addition, two\u00a0CR-2032 batteries are concealed under the grip on the non-laser side. Hogue says this ensures battery changes that don't take the laser out of zero. Each LE grip is factory bore-sighted, but windage and elevation adjustments can be made via small set screws.\r\n\r\nThe Hogue LE Grip's programming features can be accessed via pressure-sensitive buttons on the grip, the press release says. G10 panel grip choices include Hogue's G-Mascus Black, G-Mascus Green and G-Mascus Dark Earth. Furthermore, wood laminate options are reinforced walnut, rosewood and blackwood. These grips have a three-year warranty. MSRP: $239.95.\r\n\r\nFor more, visit Hogueinc.com<\/a>.","post_title":"Hogue Unveils LE G10, Wood Composite Material 1911 Grips","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-le-g10-1911-grips","to_ping":"","pinged":"","post_modified":"2023-05-31 10:43:57","post_modified_gmt":"2023-05-31 10:43:57","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/07\/25\/hogue-le-g10-1911-grips\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":96604,"post_author":"351","post_date":"2018-06-21 09:00:52","post_date_gmt":"2018-06-21 13:00:52","post_content":"\r\n\r\nHogue has unveiled a new HandALL Beavertail Grip Sleeve designed specifically for the Ruger<\/a> Security-9 pistol.\r\n\r\n[in_content post=\"105244\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeve<\/h3>\r\nIn a press release, the company said it decided to create a model-specific version of the HandALL Beavertail Grip Sleeve after it realized that the Security 9's grip frame prevents it from accepting replaceable grips.\r\n\r\n\"Due to its built-in grip frame, the Security 9 will not accommodate replaceable grips,\" said grip designer Matt Hogue. \"Our solution was to create a model of our HandALL Beavertail Grip Sleeve that works with the firearm's existing nylon frame to add comfort along with a precision fit.\"\r\n\r\nTo install the Beavertail Grip Sleeve on the Security 9, you simply slip it over the gun's grip frame until it's in position. The sleeve is designed to match the contours of the Security 9's nylon frame. It also provides finger grooves, ensuring better handling and control. According to the company, these lead into a gentle palm swell that naturally fits in the hand. As one would expect, the beavertail in the grip sleeve rises high along the frame's backstrap. The beavertail also provides better distribution of recoil forces, which is a major plus for the shooter.\r\n\r\nThe sleeve is built from a thermoplastic elastomer compound. The press release says the rubber ages \"gracefully\" and \"keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage.\" Furthermore, the surface sports Hogue's Cobblestone texture.\r\n\r\nHogue's HandALL Beavertail Grip Sleeve for the Ruger Security 9 is priced at $10.95 in black. It also comes in OD green, flat dark earth, aqua, pink and purple for $12.95.\r\n
Ruger Security-9<\/h3>\r\nReleased at the tail end of 2017, the Ruger Security 9 is a mid-sized centerfire pistol chambered in 9mm.\u00a0It comes with a four-inch barrel; 15-round, double-stack magazine; blued, through-hardened alloy steel slide;\u00a0one-piece, precision-machined aluminum chassis with full length guide rails; short, crisp trigger pull; drift adjustable 3-dot sights; and an ergonomic glass-filled nylon grip frame\u00a0with an integral accessory rail. It weighs\u00a023.7 empty, measures\u00a07.24 inches in overall length, and is\u00a0five inches in height.\r\n\r\nFor more information on Hogue, visit Hogueinc.com<\/a>. To learn about the Ruger Security-9, watch the videos below and visit Ruger.com<\/a>.\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=LEWI3BKK3X0\r\n\r\nhttps:\/\/www.youtube.com\/watch?v=2EM7Z2zQG4k","post_title":"Hogue Releases HandALL Grip Sleeve for the Ruger Security-9","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-ruger-security-9","to_ping":"","pinged":"","post_modified":"2023-05-31 10:44:58","post_modified_gmt":"2023-05-31 10:44:58","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/06\/21\/hogue-handall-grip-ruger-security-9\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":97366,"post_author":"351","post_date":"2018-03-27 09:00:00","post_date_gmt":"2018-03-27 13:00:00","post_content":"\r\n\r\nHogue's HandALL beavertail grip sleeve series now includes a model for the full-size Sig P320.\r\n\r\n[in_content post=\"101484\" alignment=\"align-left\" \/]\r\n
Hogue HandALL Beavertail Grip Sleeves<\/h3>\r\nPrecision manufactured for a secure fit, the HandALL beavertail grip sleeve is installed by slipping it over the P320 frame. Once that's done, the sleeve's finger grooves enable the user to intuitively handle and control the firearm. The groove lead into a palm swell that naturally fits into the hand. Meanwhile, the beavertail built into the grip sleeve rises high along the frame's backstrap. This gives the user higher hand comfort on the grip. Furthermore, the beavertail provides better distribution of recoil forces, cushioning the user's hand during recoil along the way.\r\n\r\nThe HandALL grip sleeve is built from a durable thermoplastic elastomer compound. Hogue claims this rubber ages well and keeps a firm, tacky feel throughout the grip's life. It won't harden, split or crack. In addition, the surface is covered with Hogue's Cobblestone texture, which is a series of small circular bumps that provide a non-slip, non-irritating grip on the rubber.\r\n\r\n\"Since our exacting fit line of grip sleeves debuted, the P320 has been at the top of our to-do list,\" grip designer Matt Hogue said in the press release. \"The precision features of our new grip sleeves compliment the enhanced design of this firearm perfectly. This choice of firearm for many global military, law enforcement and commercial users demands the best fitting grip possible. We have accomplished that.\"\r\n\r\nHogue's HandALL beavertail grip sleeve for the Sig P320 is available in black, OD green, flat dark earth, aqua, pink and purple. MSRP is $10.95 for the black, and $12.95 for all other options. Other HandALL beavertail grip sleeves are already available for the Glock<\/a> 26, 27, 42 and 43; Ruger LCP II; Ruger LC9; S&W M&P Bodyguard and M&P Shield; Taurus TCP and Spectrum; and the Kahr P9, P40, CW9 and CW40.\r\n\r\nFor more on Hogue, visit hogueinc.com<\/a>.\r\n\r\n<\/div>\r\n<\/div>\r\n<\/div>\r\n<\/div>","post_title":"Hogue Rolls Out HandALL Beavertail Grip Sleeves for Sig P320","post_excerpt":"","post_status":"publish","comment_status":"open","ping_status":"closed","post_password":"","post_name":"hogue-handall-grip-sleeves-sig-p320","to_ping":"","pinged":"","post_modified":"2023-05-31 10:48:56","post_modified_gmt":"2023-05-31 10:48:56","post_content_filtered":"","post_parent":0,"guid":"https:\/\/www.dev.athlonoutdoors.com\/2018\/03\/27\/hogue-handall-grip-sleeves-sig-p320\/","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
