Anchor ads are not supported on this page.

\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"Speed-Tac<\/figure>\n\n\n\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

\"Speed-Tac<\/figure>\n\n\n\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

\"Speed-Tac<\/figure>\n\n\n\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
\"Speed-Tac<\/figure>\n\n\n\n

Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

\"Speed-Tac<\/figure>\n\n\n\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n

The curious faces I get when discussing loading AR mags is understandable. I tell students they should only load their mags to 28 or 29. Yes, I know it\u2019s a 30-round mag, but the reality is that most mags won\u2019t seat with a standard bolt carrier in a forward position. Yes, I know\u2026\u201d but, If I beat on it.\u201d Friends, if you have to beat it, there\u2019s a problem. I have discovered a solution, though\u2014the new Speed-Tac AR Bolt.<\/p>\n\n\n\n

\"Speed-Tac<\/figure>\n\n\n\n

Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

\"Speed-Tac<\/figure>\n\n\n\n

The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Full 30 Rounds<\/strong><\/h3>\n\n\n\n

When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

 Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

\"The<\/figure>\n\n\n\n

The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

Specs<\/p>\n\n\n\n

Weight<\/td>6.6 lbs<\/td><\/tr>
Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
Length<\/td>34.4\u201d<\/td><\/tr>
Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
Page 1 of 17 1 2 17

POPULAR

No Content Available

BROWSE BY BRAND

\n
  • MSRP: $259.99<\/li>\n<\/ul>\n","post_title":"RISE Reliant Triggers: Drop-In Triggers for Remington 700 Rifles","post_excerpt":"","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"rise-reliant-triggers","to_ping":"","pinged":"\nhttps:\/\/dev.athlonoutdoors.com\/article\/introducing-the-rise-reliant-pro-remington-700-trigger\/","post_modified":"2024-11-22 15:49:01","post_modified_gmt":"2024-11-22 20:49:01","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=392266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":390564,"post_author":"1219","post_date":"2024-11-01 14:00:00","post_date_gmt":"2024-11-01 18:00:00","post_content":"\n

    The curious faces I get when discussing loading AR mags is understandable. I tell students they should only load their mags to 28 or 29. Yes, I know it\u2019s a 30-round mag, but the reality is that most mags won\u2019t seat with a standard bolt carrier in a forward position. Yes, I know\u2026\u201d but, If I beat on it.\u201d Friends, if you have to beat it, there\u2019s a problem. I have discovered a solution, though\u2014the new Speed-Tac AR Bolt.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

    The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

    There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

    This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Full 30 Rounds<\/strong><\/h3>\n\n\n\n

    When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

    In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

    For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

     Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

    This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

    Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

    The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

    For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

    Specs<\/p>\n\n\n\n

    Weight<\/td>6.6 lbs<\/td><\/tr>
    Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
    Length<\/td>34.4\u201d<\/td><\/tr>
    Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
    MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
    Page 1 of 17 1 2 17

    POPULAR

    No Content Available

    BROWSE BY BRAND

    \n
  • Adjustable Pull Weight: <1 to >3 lbs (preset at 2 lbs)<\/li>\n\n\n\n
  • MSRP: $259.99<\/li>\n<\/ul>\n","post_title":"RISE Reliant Triggers: Drop-In Triggers for Remington 700 Rifles","post_excerpt":"","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"rise-reliant-triggers","to_ping":"","pinged":"\nhttps:\/\/dev.athlonoutdoors.com\/article\/introducing-the-rise-reliant-pro-remington-700-trigger\/","post_modified":"2024-11-22 15:49:01","post_modified_gmt":"2024-11-22 20:49:01","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=392266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":390564,"post_author":"1219","post_date":"2024-11-01 14:00:00","post_date_gmt":"2024-11-01 18:00:00","post_content":"\n

    The curious faces I get when discussing loading AR mags is understandable. I tell students they should only load their mags to 28 or 29. Yes, I know it\u2019s a 30-round mag, but the reality is that most mags won\u2019t seat with a standard bolt carrier in a forward position. Yes, I know\u2026\u201d but, If I beat on it.\u201d Friends, if you have to beat it, there\u2019s a problem. I have discovered a solution, though\u2014the new Speed-Tac AR Bolt.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

    The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

    There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

    This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Full 30 Rounds<\/strong><\/h3>\n\n\n\n

    When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

    In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

    For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

     Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

    This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

    Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

    The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

    For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

    Specs<\/p>\n\n\n\n

    Weight<\/td>6.6 lbs<\/td><\/tr>
    Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
    Length<\/td>34.4\u201d<\/td><\/tr>
    Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
    MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
    Page 1 of 17 1 2 17

    POPULAR

    No Content Available

    BROWSE BY BRAND

    \n
  • Trigger Shapes: Flat or curved<\/li>\n\n\n\n
  • Adjustable Pull Weight: <1 to >3 lbs (preset at 2 lbs)<\/li>\n\n\n\n
  • MSRP: $259.99<\/li>\n<\/ul>\n","post_title":"RISE Reliant Triggers: Drop-In Triggers for Remington 700 Rifles","post_excerpt":"","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"rise-reliant-triggers","to_ping":"","pinged":"\nhttps:\/\/dev.athlonoutdoors.com\/article\/introducing-the-rise-reliant-pro-remington-700-trigger\/","post_modified":"2024-11-22 15:49:01","post_modified_gmt":"2024-11-22 20:49:01","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=392266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":390564,"post_author":"1219","post_date":"2024-11-01 14:00:00","post_date_gmt":"2024-11-01 18:00:00","post_content":"\n

    The curious faces I get when discussing loading AR mags is understandable. I tell students they should only load their mags to 28 or 29. Yes, I know it\u2019s a 30-round mag, but the reality is that most mags won\u2019t seat with a standard bolt carrier in a forward position. Yes, I know\u2026\u201d but, If I beat on it.\u201d Friends, if you have to beat it, there\u2019s a problem. I have discovered a solution, though\u2014the new Speed-Tac AR Bolt.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

    The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

    There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

    This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Full 30 Rounds<\/strong><\/h3>\n\n\n\n

    When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

    In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

    For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

     Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

    This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

    Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

    The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

    For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

    Specs<\/p>\n\n\n\n

    Weight<\/td>6.6 lbs<\/td><\/tr>
    Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
    Length<\/td>34.4\u201d<\/td><\/tr>
    Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
    MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
    Page 1 of 17 1 2 17

    POPULAR

    No Content Available

    BROWSE BY BRAND

    \n
  • Platforms: Remington 700 and clones<\/li>\n\n\n\n
  • Trigger Shapes: Flat or curved<\/li>\n\n\n\n
  • Adjustable Pull Weight: <1 to >3 lbs (preset at 2 lbs)<\/li>\n\n\n\n
  • MSRP: $259.99<\/li>\n<\/ul>\n","post_title":"RISE Reliant Triggers: Drop-In Triggers for Remington 700 Rifles","post_excerpt":"","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"rise-reliant-triggers","to_ping":"","pinged":"\nhttps:\/\/dev.athlonoutdoors.com\/article\/introducing-the-rise-reliant-pro-remington-700-trigger\/","post_modified":"2024-11-22 15:49:01","post_modified_gmt":"2024-11-22 20:49:01","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=392266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":390564,"post_author":"1219","post_date":"2024-11-01 14:00:00","post_date_gmt":"2024-11-01 18:00:00","post_content":"\n

    The curious faces I get when discussing loading AR mags is understandable. I tell students they should only load their mags to 28 or 29. Yes, I know it\u2019s a 30-round mag, but the reality is that most mags won\u2019t seat with a standard bolt carrier in a forward position. Yes, I know\u2026\u201d but, If I beat on it.\u201d Friends, if you have to beat it, there\u2019s a problem. I have discovered a solution, though\u2014the new Speed-Tac AR Bolt.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    Speed-Tac AR Bolt<\/strong><\/h2>\n\n\n\n

    The challenge is real. We are either loading from a closed bolt or doing a tactical reload, and you grab a full mag.<\/a> You insert said mag only to find out it won\u2019t seat. You quickly thumb out two rounds and try again. This is no big deal unless it is a big deal. If you are in a fight for your life, it is more than a big deal. It could be the difference between life and death.<\/p>\n\n\n\n

    \"Speed-Tac<\/figure>\n\n\n\n

    The Dreaded Mag Drop<\/strong><\/h3>\n\n\n\n

    There is also that chance of what I call false seating. This occurs for various reasons, but you think your magazine is seated when it\u2019s not. Moments later, while you are in the process of being Johnny or Suzy cool with your rifle, the mag simply falls out to the ground. The only thing you can count on is that everyone in the class will be looking at you the moment it happens. If this happens in class or on the range, it\u2019s embarrassing. If it happens in a fight, you are in trouble.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Speed-Tact AR Bolt \u2013 Fill it up!<\/strong><\/h3>\n\n\n\n

    This challenge has existed with the AR since its inception, and honestly, I just accepted it as one of its shortcomings. There is a company, however, that simply could not take it anymore and decided to address the challenge. Richard Aitken of Speed-Tact took a long, hard look at the AR bolt carrier and quickly found the issue. It was simply a matter of geometry on a specific part of the bolt. When this was shown and explained, I honestly said, \u201cWhat the hell.\u201d Richard is a brilliant man, a shooter, and a problem solver. But how in the heck have countless AR engineers missed this for decades? Not only does this small change in bolt geometry allow full mags to sit in easily, but it doesn\u2019t affect function in any way.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Full 30 Rounds<\/strong><\/h3>\n\n\n\n

    When I say that a full mag now seats, that doesn\u2019t do it justice. A mag <\/a>now seats purely with gravity. While you would never do this, it was a very poignant demonstration. The rifle was turned upside down, and a mag was gently set into the mag well. When released, the mag traveled the rest of the way in and seated. No pushing, no beating, and no cursing. It is very impressive.<\/p>\n\n\n\n

    In my opinion, every serious AR manufacturer on Earth needs to knock on Richard\u2019s door and buy the rights to this. This is especially true for companies building guns for war fighters and law enforcement. These are arenas where those two lost rounds are critical. If you are serious about really topping your gun off, like I am, this is a must-have upgrade to your rifle.<\/p>\n\n\n\n

    For more information, visit:https:\/\/speed-tac.com\/<\/a><\/p>\n","post_title":"Speed-Tac AR Bolt","post_excerpt":"Speed-Tac AR Bolt","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"speed-tact-ar-bolt","to_ping":"","pinged":"","post_modified":"2024-11-01 13:51:06","post_modified_gmt":"2024-11-01 17:51:06","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=390564","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":389266,"post_author":"1219","post_date":"2024-10-10 14:00:00","post_date_gmt":"2024-10-10 18:00:00","post_content":"\n

     Once the sole realm of gun nerds and dedicated riflemen, precision shooting has become huge. The interest in this challenging part of the firearms world fueled the growth of guns and gear as well. One company that has been synonymous with the precision world is MDT<\/a>. Their chassis systems have helped shooters evolve from out of the box guns, to custom rifles. One of their newest offerings is The New MDT JAE-G5 Chassis.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis<\/strong><\/h2>\n\n\n\n

    This is a new and improved member of the MDT JAE series. It offers superior control and customization for competitive shooters and enthusiasts alike. The chassis has some exceptional design features. These include an internal dampening system. Engineered with dampening throughout the entire chassis, this feature eliminates vibrations, providing stability and a \"dead\" feeling during shooting. The system is also M-LOK compatible. The forend features M-LOK pockets, allowing for easy attachment of accessories.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    Because long range sessions can be taxing, MDT looked at adjustability for comfort. Adjustable features include barricade stop position, magazine latch height, cheek rest height, and length-of-pull. It also comes with both a vertical and angled grip for optimal hand positioning. Along that same line is the quick-release cheek piece. This allows users of The New MDT JAE-G5 Chassis to effortlessly remove the cheek riser with a quick-release feature for easy bolt removal.<\/p>\n\n\n\n

    Comfort and Adjustability<\/strong><\/h3>\n\n\n\n

    The chassis continues its feature rich streak by including a full-length ARCA rail. This allows shooters to easily attach a variety of accessories. Because it is built to support competition shooting it has internal weight compatibility. The JAE-G5 supports internal weights, and MDT is now offering a 2-pack of internal weights, designed to help balance your rifle perfectly.<\/p>\n\n\n\n

    \"The<\/figure>\n\n\n\n

    The New MDT JAE-G5 Chassis is available for the popular Remington 700 short action<\/a>. The chassis also comes with a significant price reduction from $1,999.95 USD to $1,399.95 USD. This system continues the legacy of the JAE series. If you are looking to take your rifle to the next level, The New MDT JAE-G5 Chassis system should be on your radar.<\/p>\n\n\n\n

    For more information visit:https:\/\/mdttac.com\/<\/a><\/p>\n\n\n\n

    Specs<\/p>\n\n\n\n

    Weight<\/td>6.6 lbs<\/td><\/tr>
    Materials<\/td>Hard anodized 6061 aluminum with a Cerakote finish and polymer panels.<\/td><\/tr>
    Length<\/td>34.4\u201d<\/td><\/tr>
    Compatibility<\/td>Remington 700 Short Action<\/td><\/tr>
    MSRP<\/td>$1399.95<\/td><\/tr><\/tbody><\/table><\/figure>\n","post_title":"The New MDT JAE-G5 Chassis","post_excerpt":"The New MDT JAE-G5 Chassis","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"the-new-mdt-jae-g5-chassis","to_ping":"","pinged":"","post_modified":"2024-10-09 10:51:11","post_modified_gmt":"2024-10-09 14:51:11","post_content_filtered":"","post_parent":0,"guid":"https:\/\/dev.athlonoutdoors.com\/?p=389266","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}],"next":false,"prev":false,"total_page":1},"paged":1,"column_class":"jeg_col_2o3","class":"jnews_block_23"};
    Page 1 of 17 1 2 17

    POPULAR

    No Content Available

    BROWSE BY BRAND

    \n